[30 Closed Cab PU]

If showing for fine point judging, Brassworks make theirs per Ford prints. Some have had Past issues with fit, necks being on wrong angle, and necks not being correct diameter, bracket mounting holes not lining up, (undersize for correct hoses). Read their website completely, follow all info on their site, measure carefully, etc. and give them a call. For best chances of everything being correct you may want to send your radiator to them in so they get things matched up correctly.


I prefer Bergs, drop in replacement, excellent cooling, high quality, Nice looking but not made exactly per Ford Prints. No known issues/complaints.


If your cooling system is in good shape, there are other vendors that will work. The key is to insure your Block/Head are clean of Rust/Scale/Oil-grease.


Brassworks is the only recommended 2 row tube core. Issues with all other 2 row tube cores with overheating. A good 3 or 4 row Core is recommended.