Quote:
Originally Posted by Tom Wesenberg
I have a 6 volt to 12 volt convertor, but you can't use a common ground for both voltages.
|
His appears to have a common ground. I would connect it as jmeckel posted. Also, with the photo of the hand holding the unit, the device looks quite small and does not look like it will take much current, so when it comes to transmitting using a CB, that unit might not take much power! I don't see any indication of the power limits on it, but it sure looks small. I don't think I would use a unit like that for much more than charging a cell phone, or at most, receiving a CB signal.