The Ford Barn - View Single Post

holdover · 02-20-2017, 08:49 PM

John, this is great, thanks for the chuckle...
"I have mine hanging on the wall with a specially designed tuna fish can shelf that the nozzle is placed in with a depth of 5/16" of an inch off the bottom of said can. Plans and materials list will be provided when 13 requests have been made. Wall hanger design is still being worked on for complete perfection and not available - nail length not yet determined. Design to address the leaks from the grease gun body and plunger are in the works. Above plans are for the nozzle dripping only."

02-20-2017, 08:49 PM	#19
holdover Senior Member Join Date: May 2011 Location: SW Virginia near the Blue ridge Parkway Posts: 674	Re: Grease Gun Storing John, this is great, thanks for the chuckle... "I have mine hanging on the wall with a specially designed tuna fish can shelf that the nozzle is placed in with a depth of 5/16" of an inch off the bottom of said can. Plans and materials list will be provided when 13 requests have been made. Wall hanger design is still being worked on for complete perfection and not available - nail length not yet determined. Design to address the leaks from the grease gun body and plunger are in the works. Above plans are for the nozzle dripping only."