The Ford Barn - View Single Post

aermotor · 02-19-2017, 08:47 PM

I have mine hanging on the wall with a specially designed tuna fish can shelf that the nozzle is placed in with a depth of 5/16" of an inch off the bottom of said can. Plans and materials list will be provided when 13 requests have been made. Wall hanger design is still being worked on for complete perfection and not available - nail length not yet determined. Design to address the leaks from the grease gun body and plunger are in the works. Above plans are for the nozzle dripping only.

John

02-19-2017, 08:47 PM	#5
aermotor Senior Member Join Date: Mar 2015 Location: Greenville, SC Posts: 1,099	Re: Grease Gun Storing I have mine hanging on the wall with a specially designed tuna fish can shelf that the nozzle is placed in with a depth of 5/16" of an inch off the bottom of said can. Plans and materials list will be provided when 13 requests have been made. Wall hanger design is still being worked on for complete perfection and not available - nail length not yet determined. Design to address the leaks from the grease gun body and plunger are in the works. Above plans are for the nozzle dripping only. John Last edited by aermotor; 02-19-2017 at 08:56 PM.