View Single Post
Old 04-09-2014, 05:06 PM   #7
Charlie ny
Senior Member
 
Join Date: May 2010
Posts: 2,587
Default Re: stromberg large 97 help

jan,
You will have to adjust the float......No one knows Strombergs like Max
and his instruction to me if I recall was the toe of the float should be slightly lower
than the hinge end when pushing the tang against the needle and seating the needle in the seat.....060 should be ok. Be ABSOLUTELY sure that the little
90 degree bend on the tang clears the inlet fitting where it protrudes into the bowl
and also clears the inside face of the bowl when pushing it against the inlet needle.
Charlie ny
Charlie ny is offline   Reply With Quote