View Single Post
Old 10-24-2020, 12:59 PM   #16
Senior Member
GOSFAST's Avatar
Join Date: May 2010
Location: Long Island, NY
Posts: 1,052
Default Re: Finally some Cam Degree Numbers - Now what?

The only number you really need to properly degree the cam is the "ICL", this number tells the whole story! You don't check this with any lash included, it's normally done with the lifter riding on the #1 intake lobe and the dial indicator on the lifter!

Don't confuse this with the "LSA", two totally different animals!

I would not pay too much attention to the "events", it's difficult at best to dial in any cam with the "4" event numbers!

Thanks, Gary

P.S. Been using the "ICL" method for more than 55 years now in all our builds!
GOSFAST is offline   Reply With Quote