View Single Post
Old 10-24-2020, 11:50 AM   #15
flatjack9
Senior Member
 
flatjack9's Avatar
 
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 3,846
Default Re: Finally some Cam Degree Numbers - Now what?

I dug out an old profile I did of a 77B. Looking at 014 lift figures, I have the valve opening at 86 BBDC and closing at 25 ATDC. These numbers don't correlate will with advertised numbers and I measured .360 lift, so not real confident in this cam. Someone may have put a regrind on it.

Last edited by flatjack9; 10-24-2020 at 12:33 PM.
flatjack9 is offline   Reply With Quote