Quote:
Originally Posted by Ross F-1
I have the Innovate unit linked above, it is very interesting to watch how the carb responds under different conditions.
You have to weld a bung on the exhaust, preferably up near the manifold. Hook up power and a thick cable between the O2 sensor and the display head. Can be hooked up to a laptop to capture data while driving (see below). I'd say you could switch it between cars in less that half an hour.
|
How do you get on then with twin pipes does it require a bung at each one.?
Appreciate your info as want to be sure to get the right one and all bits in one hit.
Phil NZ