Re: Question on Cam Gear Marks - UPDATE
Try this; remove timing cover, line up your existing timing marks, undo the 4 bolts holding the camgear on. Remove cam gear. Replace gear after moving cam [edit]clockwise sufficient to be able to bolt gear back on with its timing mark one tooth to the [edit] LEFT of that on the crank gear. bolt everything back. You have just retarded the cam [and timing] by 16 odd degrees. See how it runs now. Good luck
__________________
Unfortunately, two half wits don't make a whole wit!
Last edited by Brian; 10-08-2020 at 05:17 PM.
|