[Tom in TN]

Guys, Thank you for the priceless advice – DMSFRR – I hadn’t considered attaching a ‘pull wire’ but your advice makes good sense.
54VICKY – from your experience, it does work- so I’ll be using one.
JIMNNN – my horns work fine, IF I jumper a wire from the 'bullet' to ground, but with the ‘bullet’ not contacting the horn ring, not so much. I have NOT changed mine to 12v. It’s a one owner car and will remain in stock condition.
KULTULZ- Thanks for the pointer to C&G – my new horn wire is on its way.

Thanks again guys.