Quote:
Originally Posted by Bored&Stroked
Note: If you can't build oil pressure by cranking the engine over with the plugs out - then don't start it . . . as something is wrong. You don't want to ruin all your bearings due to no oil pressure.  |
Sage advice:
When I pulled the plugs and cranked over my motor (6V starter in a 12V system), the motor spun over incredibly fast and oil pressure was almost instant.
If you don't get pressure after approx. 5-10 sec, shut 'er down and pull her out. If you don't, I'm afraid you'll just be doing damage.