Quote:
Originally Posted by bobscogin
If I could ask a favor. -- On a '28-29 pickup with original cab and bed locations, how wide is the gap between the back of the cab and bed, measured at the top of the bed panel? Thanks,Bob
|
Bob, the important measurement you need is the spacing at the vertical join-strips for the rear/side cab panels and the pickup front panel. The cab and pickup bodies are located via the body bolts. Consequently, spacing is not adjustable.
Sorry, I only have an AA express (similar to the pickup body). My express has 1/8" spacing at one join-strip and 3/8" at the other join-strip. Original spacing would have been equal.