The Ford Barn - View Single Post

ahirt · 01-21-2020, 08:53 AM

Are you sure the Zerks are in good shape? My adapter leaked but only on a few of the fittings. Inspection showed that the ends of the fittings had been deformed by something. Because the ends were not flat, pushing the adapter harder made no difference - the grease leaked out the spot that had been "dented". A couple of new fittings solved the problem.

01-21-2020, 08:53 AM	#2
ahirt Senior Member Join Date: Nov 2014 Location: Stuart Florida Posts: 108	Re: grease gun adapter Are you sure the Zerks are in good shape? My adapter leaked but only on a few of the fittings. Inspection showed that the ends of the fittings had been deformed by something. Because the ends were not flat, pushing the adapter harder made no difference - the grease leaked out the spot that had been "dented". A couple of new fittings solved the problem.