The Ford Barn - View Single Post - Question about carb needle valve preference

stouchton · 09-09-2016, 08:09 AM

Thanks guys - will pull her apart and check for dirt or rust.

I did shut the gas off, let her run out, then opened the gas back up but she soon flooded again.

Float is good, and did not have this issue with the viton cone style valve. Float seems fine.

Have noticed some rust particles in the glass sediment bowl - so maybe something is sneaking past.

09-09-2016, 08:09 AM	#5
stouchton Senior Member Join Date: Jun 2013 Location: Pottstown, PA Posts: 342	Re: Question about carb needle valve preference Thanks guys - will pull her apart and check for dirt or rust. I did shut the gas off, let her run out, then opened the gas back up but she soon flooded again. Float is good, and did not have this issue with the viton cone style valve. Float seems fine. Have noticed some rust particles in the glass sediment bowl - so maybe something is sneaking past.