Quote:
Originally Posted by flatford8
I also have looked into these and I couldn’t figure a safe, secure way to mount to my beam trolley. I watched the online sales sites and managed to find a Milwaukee 1-ton electric with a trolley and a spreader bar. If you’re persistent in your search, you’ll find one…….Mark
|
Found a good one on youtube, it uses two I Beam trolleys to keep it level. He removed the existing mounting hardware and he used two (what appears to be) at least 3" x 3" angle running parallel to the beam on each side of the beam and bolted to the frame of the hoist. He drilled a hole on each side and on each end and ran the through bolt of the I beam trolley through the upper part of the angle. Very slick mounting