Quote:
Originally Posted by Russ/40
SO, whether doing the 9 & 3, or the 12 & 6, the same two top shim packs are used.?
|
Think about it as two separate operations, as they are.
1. is setting each side, to read the same, or not over .003, difference. Doing this you will have, uneven stacks of shims, most likely.
2. next, indicate top, and bottom, and get them to read the same. They do not have to read the same as the sides. When adjusting the top and bottom, what ever you remove, or add, both bolts will receive the same same.
You will be done when sides read the same, and top, and bottom read the same.
Remember, you have to give it time to warp, into it, ( Acclimate ) !
Herm.