The Ford Barn - View Single Post

John S · 07-23-2019, 09:07 PM

Even if you installed the wrong shaft, the release bearing should contact the pressure plate fingers squarely all at the same time. I'm really starting to think the pressure plate is at fault causing the little or no release issue.

07-23-2019, 09:07 PM	#19
John S Senior Member Join Date: Oct 2010 Location: Ellis County, Texas Posts: 337	Re: Clutch pedal Even if you installed the wrong shaft, the release bearing should contact the pressure plate fingers squarely all at the same time. I'm really starting to think the pressure plate is at fault causing the little or no release issue. __________________ John _________________________________ http://www.dmafc.com/