The Ford Barn - View Single Post - Mounting ‘Tubman’ condenser on dome distributor

Lawrie · 11-12-2021, 04:53 AM

Kevin, also on the circuit breaker under the dash,mine had a loose connection there,it took a few years to sort out ,and 5 mins to fix.
I use a metric set screw about 30 mm long and one nut and spring washer,then the wire terminal,and another spring washer and nut,
All going ok up here,nice lot of rain that’s needed.
Lawrie

11-12-2021, 04:53 AM	#15
Lawrie Senior Member Join Date: May 2010 Location: Qld, Australia Posts: 4,218	Re: Mounting ‘Tubman’ condenser on dome distributor Kevin, also on the circuit breaker under the dash,mine had a loose connection there,it took a few years to sort out ,and 5 mins to fix. I use a metric set screw about 30 mm long and one nut and spring washer,then the wire terminal,and another spring washer and nut, All going ok up here,nice lot of rain that’s needed. Lawrie