The Ford Barn - View Single Post - Mounting ‘Tubman’ condenser on dome distributor

Phil Gillespie · 11-11-2021, 03:09 PM

Normally can mount with a clamp which fits around the condenser and will have a hole at the lug section which will secure on one of the coil securing screws
The can be picked up from any hardware store as long as you get one the correct diameter to pull up and secure condenser.
Phil NZ

11-11-2021, 03:09 PM	#2
Phil Gillespie Senior Member Join Date: Sep 2011 Location: Christchurch New Zealand Posts: 1,611	Re: Mounting ‘Tubman’ condenser on dome distributor Normally can mount with a clamp which fits around the condenser and will have a hole at the lug section which will secure on one of the coil securing screws The can be picked up from any hardware store as long as you get one the correct diameter to pull up and secure condenser. Phil NZ