The Ford Barn - View Single Post

J Franklin · 06-22-2017, 01:42 PM

I think I would separate the joint with a thin bladed saw so flexing would not break the filler out or in the wrong area. I don't think the factory filled that joint although it seems kinda wide in the photo.

06-22-2017, 01:42 PM	#4
J Franklin Senior Member Join Date: May 2010 Location: Oregon Posts: 5,963	Re: Body Filler Find!!! I think I would separate the joint with a thin bladed saw so flexing would not break the filler out or in the wrong area. I don't think the factory filled that joint although it seems kinda wide in the photo.