The Ford Barn - View Single Post

Badpuppy · 09-15-2021, 11:42 AM

Thanks for the feedback, jayvee. Glad you got in contact with someone who's experienced. I would not have thought that loss of residual magnetism in one of the fields (usually from long disuse) would show those symptoms, and that a reflash would cure it. Very good. I learned something today. Too many times several suggestions are offered and we never hear for sure what the resolution was. Thanks again.

BTW - FSB 11/29 simply says to move the coil wire from the battery side to the generator side of the firewall junction box. The ammeter then reads only battery current.

09-15-2021, 11:42 AM	#22
Badpuppy Senior Member Join Date: Dec 2017 Location: Guthrie, OK Posts: 1,145	Re: Voltage/Amperage question? Thanks for the feedback, jayvee. Glad you got in contact with someone who's experienced. I would not have thought that loss of residual magnetism in one of the fields (usually from long disuse) would show those symptoms, and that a reflash would cure it. Very good. I learned something today. Too many times several suggestions are offered and we never hear for sure what the resolution was. Thanks again. BTW - FSB 11/29 simply says to move the coil wire from the battery side to the generator side of the firewall junction box. The ammeter then reads only battery current.