Quote:
Originally Posted by JSeery
Ya, that works better. Connect a jumper to the terminal labeled ground button and short it to ground and see if the starter turns.
What's going on at the starter? If it worked directly with an input before, how is it wired up now?
Reread the OP, and now I'm not sure what is the issue you are having.
The starter will not turn the engine over?
Or the engine turns over but the engine will not fire?
|
The fault at present is that starter will not turn over engine.
Before on the test stand this solenoid was not in play it was just wired through a key start and fired up well.
Phil NZ