The Ford Barn - View Single Post

chrs1961815 · 07-20-2020, 09:16 AM

I had a similar issue with the radius ball aligning with the clutch housing, though mine was not off that far. I was able to just jack it into place, but 3/4 of an inch is fairly large. I don't have any idea why this is like this because my frame was straight as well, and any sag around the motor mounts would not do this.

07-20-2020, 09:16 AM	#2
chrs1961815 Senior Member Join Date: Jul 2018 Location: Spring Grove, Illinois Posts: 1,371	Re: Frame to front and rear end alignment I had a similar issue with the radius ball aligning with the clutch housing, though mine was not off that far. I was able to just jack it into place, but 3/4 of an inch is fairly large. I don't have any idea why this is like this because my frame was straight as well, and any sag around the motor mounts would not do this. __________________ "The more things change, the more they stay the same."