Re: Hello all, new to the forum!
SVF was the only parts house that sold the correct length wiring for my 28 and 29 with drum taillight. SVF has the machine and make the wiring harness at their building. The correct harness wasn't listed in their catalog, but I called them up and asked about it. It didn't have the switch plate on the end, but that's OK, because the drum taillight with fluted headlights takes a different switch plate, which isn't being reproduced. That plate is hard to find, but I finally found a couple NOS plates from Doc Kalinka at Hershey about 5 years ago.
I would call SVF and order a part and ask them to send a catalog at the same time they ship the part. The catalog is very thick and heavy, so it has to cost SVF a fair amount of money to mail.
BTW, I tried to post this under #72 Rowdy, but it looks like it will be under Mike at #73.
|