02-26-2021, 01:25 PM
|
#3
|
Senior Member
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
|
Re: Fuel filler neck measurement
Quote:
Originally Posted by JeffB2
If the tank is shot usually the sender is also erroded from old ethanol fuels also many of the new tanks use a different sender with a different bolt pattern from OEM,this solves that issue as well as the straps that need to be changed. https://www.ebay.com/itm/1955-Ford-P...kAAOxy7q1RY7dg The same vendor also can supply you with a non stainless tank kit for about $100 less. The picture here shows a '55 tank in a '53 not altered the filler neck was not changed. Do you notice the slight difference ? The reason you should get the tank with the matching straps is in the second picture unless you want to lenthen the old ones.
|
Repost missing picture.
|
|
|