Re: shortened pitman arms
All the shortened ones I've installed hit the stops both before and after.I did remove one for somebody that said it reduced his radius,when I showed him his spindles were hitting the stops he said it meant nothing,he knew his radius was greater and had me take it off.I don't know if I ever use full travel or not.On my pickup if I turn the wheels over to full warp in one direction,it is all but impossible to get them back again.If I back up a foot or so they straighten out.If I let the clutch out from a dead stop with the wheels at full warp the car will take off and turn,but it would really rather plow straight ahead.
|