Thread
:
Trunk alignment - pic heavy
View Single Post
02-21-2014, 08:23 PM
#
1
ctfortner
Member
Join Date: May 2010
Location: West TN
Posts: 63
Trunk alignment - pic heavy
Got this on the HAMB group also, but figured not all yall in that group.
It may be an alignment issue, but I cant find it. When the trunk is closed its not flush. It is up around the rear windshield, but starting about half way back its raised up. Pictures can explain better than I can.
I have loosened the bolts holding the lid to the hinge, its as good as it will get. I have removed the locking mechanism pieces and re-installed, there is no adjustment left in them to allow it to fit better. Wonder if the thing is warped, or am I just missing something here. I can live with it for now, but if its something I overlooked I will correct it. There is enough gap in the curve of the trunk that the seal doesnt seal well enough to keep water out, so its a good size gap in places. The pictures are showing the trunk complete closed and latched, as good as I can get it in its current state.
This is pretty flush here
ctfortner
View Public Profile
Send a private message to ctfortner
Find More Posts by ctfortner