The Ford Barn - View Single Post

Andy · 10-20-2023, 09:49 PM

I added a real lip seal to my 32 sector housing. I did not have to cut any metal. I made a paper baffle for the sector bore and filled the cavity with J B Weld. I did have to machine the epoxy for the seal. Never leaked again, I had a thread on the HAMB with pictures.
The seal lets you use the correct oil.

10-20-2023, 09:49 PM	#17
Andy Senior Member Join Date: May 2010 Location: Kerrville, Tx Posts: 2,772	Re: Stp. I added a real lip seal to my 32 sector housing. I did not have to cut any metal. I made a paper baffle for the sector bore and filled the cavity with J B Weld. I did have to machine the epoxy for the seal. Never leaked again, I had a thread on the HAMB with pictures. The seal lets you use the correct oil.