The Ford Barn - View Single Post

pinball73 · 07-15-2020, 10:45 AM

Well i have not been on hear for a while & as usual i have a question! to start with i finally found a two tooth steering box/sector & have it rebuilt & just about ready to install it on my 29 & by the way i see why every one wants to use them! they can be adjusted down so fine that there is no center play & i believe it is going to be easier to steer! & it is going to be bunches better than my seven tooth ever was.so much for that! i also bought a easy steer kit to go in the ends or the tie rod & drag link! i have found that some of the round balls are egged shaped a bit. my question is can i replace the balls or do i have to buy the complete steering arm? i replaced the one on pitman arm, no problem! just not Shure about the steering arm.

07-15-2020, 10:45 AM	#1
pinball73 Senior Member Join Date: Nov 2017 Location: North mo. Posts: 106	Steering box & steering arm Well i have not been on hear for a while & as usual i have a question! to start with i finally found a two tooth steering box/sector & have it rebuilt & just about ready to install it on my 29 & by the way i see why every one wants to use them! they can be adjusted down so fine that there is no center play & i believe it is going to be easier to steer! & it is going to be bunches better than my seven tooth ever was.so much for that! i also bought a easy steer kit to go in the ends or the tie rod & drag link! i have found that some of the round balls are egged shaped a bit. my question is can i replace the balls or do i have to buy the complete steering arm? i replaced the one on pitman arm, no problem! just not Shure about the steering arm.