The Ford Barn - View Single Post

CT Jack · 01-23-2020, 09:41 PM

Take the jets to a plating shop and have a copper or nickel flash put on the fittings. This will easily add .0002" to the surface of the threads. Make sure you put wax in the orifice of the fitting otherwise it will get plugged.

01-23-2020, 09:41 PM	#20
CT Jack Senior Member Join Date: May 2010 Location: Hebron, CT Posts: 432	Re: Cap and Comp Jet Helicoil repair Take the jets to a plating shop and have a copper or nickel flash put on the fittings. This will easily add .0002" to the surface of the threads. Make sure you put wax in the orifice of the fitting otherwise it will get plugged.