The Ford Barn - View Single Post

Macdozer · 10-18-2014, 05:48 PM

Update I have removed all the pistons and oil pump. To remove the oil pump I had to remove the oil pump idle gear off of the cam shaft gear. The valve lifters are all stuck.

So now I am trying to remove the valves. Again I am working on a 59ab.

I thought I would have the valves for 48 to 53 as seen here
http://www.vanpeltsales.com/FH_web/f...al_tools-1.htm

But don't see how to remove the valve sleeve or the locks, I don't see the locks at all.
Here is what I am looking at.

10-18-2014, 05:48 PM	#45
Macdozer Senior Member Join Date: Jun 2012 Location: Central NH Posts: 192	Re: 59 AB engine rebuild Update I have removed all the pistons and oil pump. To remove the oil pump I had to remove the oil pump idle gear off of the cam shaft gear. The valve lifters are all stuck. So now I am trying to remove the valves. Again I am working on a 59ab. I thought I would have the valves for 48 to 53 as seen here http://www.vanpeltsales.com/FH_web/f...al_tools-1.htm But don't see how to remove the valve sleeve or the locks, I don't see the locks at all. Here is what I am looking at.