Re: 1940 Steering lock Disassembly
Really helpful post! I'm trying to get a very rusty drop apart. I've done it before, but in this case the key cylinder (with key in it) wont budge. Got pin out clean, but no way to pull on or push on cylinder. Soaked the whole thing in Evaporust, as it's not supposed to act on anything but rust. Took some of the rust out.
Any ideas besides drilling out the whole cylinder assy?
The column lock is really stuck too, but key cylinder is first problem.....
Gordon
__________________
Don't mind learning from my mistakes. Just wish I didn't learn EVERYTHING from my mistakes..
|