The Ford Barn - View Single Post - Do I really have to find a spring spreader?

Heard · 02-11-2014, 04:14 PM

Sixseven. DD is correct. I just grunted it off, but in the process, I bent up both of the shackles. Not so sure that is the best way to do it. At least not with the shackles I had. They are Pete and Jake. One of the plates is fixed to both pins. The other side (of the same shackle) has a removable plate. If both plates were removable, it probably would have been easier than trying to slide the entire pin out under even this slight pressure. Not sure if all the shackles are like mine or not.

02-11-2014, 04:14 PM	#83
Heard Senior Member Join Date: Sep 2013 Location: Florida Posts: 582	Re: Do I really have to find a spring spreader? Sixseven. DD is correct. I just grunted it off, but in the process, I bent up both of the shackles. Not so sure that is the best way to do it. At least not with the shackles I had. They are Pete and Jake. One of the plates is fixed to both pins. The other side (of the same shackle) has a removable plate. If both plates were removable, it probably would have been easier than trying to slide the entire pin out under even this slight pressure. Not sure if all the shackles are like mine or not. __________________ Do I look like I have a plan B?