Re: Blower motor center main cap
Glad to see some info on blower engines, I have a set up from Mike Davidson Flatattack, it uses the billet caps and a re-enforcing plate, After seeing the broken bolts I am going to get the A.R.P studs, the kit has grade 5 bolts, I think the grade 5s will be a little too weak after going to all the expense to use this set up I cant imagine why one would use such soft bolts? They came with the kit. What is the deal about installing studs , I have heard a lot of people set and argue what is the correct way to install studs in an engine block ,some say tighten to torque spec. and some say don't tighten to spec. seems to me they will either be tight enough or not torqued and too loose and will come out. which is it?
fordestes
|