The Ford Barn - View Single Post

redmodelt · 11-17-2018, 10:20 AM

Just because you can get the bolts out with the swivel socket does not mean the pan will come off. I have seen this issue with original mounts too. We made a jack screw that fits into the crank guide and pushes on the pulley nut. Loosen the mount screws and push the motor back.

11-17-2018, 10:20 AM	#8
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,346	Re: sump removal Just because you can get the bolts out with the swivel socket does not mean the pan will come off. I have seen this issue with original mounts too. We made a jack screw that fits into the crank guide and pushes on the pulley nut. Loosen the mount screws and push the motor back. __________________ I know the voices aren't real but damn they have some good ideas!