View Single Post
Old 07-07-2020, 12:25 AM   #8
Bill G
Senior Member
 
Bill G's Avatar
 
Join Date: Jun 2017
Location: Walla Walla, WA
Posts: 753
Default Re: Rear backing plate/brake installation Les Andrews instructions

I resisted removing the rear radius rods, but between getting the e-brake return spring on its lever and then getting the whole assembly back on, I came to the conclusion that removing the radius rods was by far the easiest way. I remove them one at a time, install the plate and then reinstall the radius rod and them move on to the other one.
__________________
-Bill G
Member of Walla Walla Sweet A's Model A Club
Bill G is offline   Reply With Quote