View Single Post
Old 07-06-2020, 03:34 PM   #7
160B
Senior Member
 
160B's Avatar
 
Join Date: Aug 2010
Location: Port Orchard, WA
Posts: 1,467
Default Re: Rear backing plate/brake installation Les Andrews instructions

Quote:
Originally Posted by Norm M View Post
For me, the easiest way to install the rear backing plates as an assembled unit is to remove the rear radius rods, install the rear two bolts then attach the radius rods and the front two bolts on each.
Quote:
Originally Posted by 31Tudor View Post
This is the way I have had the most luck, even on an assembled car. I have spent so much time trying to assemble the emergency brake arm and re-hook the spring back on, that for me it is so simple to put the whole assembled unit on, and then put the radius rods back on, one bolt and done.
I prefer to remove the rear radius rods and install the backing plates with the emergency return spring in place.
__________________
1931 160B & 1931 68B

If you don't have time to do it right the 1st time, how do you have time to do it the 2nd time?
160B is offline   Reply With Quote