View Single Post
Old 02-26-2013, 06:49 PM   #4
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: spring kit for rad

No, the bolt goes in from the bottom up, then the radiator tabs setting on the frame welt (made from various scrap) then the spring on top of the tab, then the castle nut and cotter pin. BTW my original welt between the radiator tabs and crossmember is made from brake lining that has been rolled thin.
Tom Wesenberg is offline   Reply With Quote