The Ford Barn - View Single Post - How do you get front wheels straight before setting Toe-In

Herb Concord Ca · 09-24-2018, 04:09 PM

the only way to get both wheels straight, if they are not, is to start both ends at the same time, best done with the tie rod and ends removed from the steering arms. Thread each end one complete turn and place the tie rod with ends on the steering arms, adjust them and then turn tie rod the get the toe-in you want. Hope the steering arm balls are round, if not, they should be replaced, and that's another story.

09-24-2018, 04:09 PM	#4
Herb Concord Ca Senior Member Join Date: May 2010 Location: Concord CA Posts: 637	Re: How do you get front wheels straight before setting Toe-In the only way to get both wheels straight, if they are not, is to start both ends at the same time, best done with the tie rod and ends removed from the steering arms. Thread each end one complete turn and place the tie rod with ends on the steering arms, adjust them and then turn tie rod the get the toe-in you want. Hope the steering arm balls are round, if not, they should be replaced, and that's another story.