Re: Thread size for a Model A spark plug
Quote:
Originally Posted by midgetracer
I purchased a Snap On spark plug tap that is listed as 7/8 18NS. Spark plug tap
Stock #T2818. I needed to clean up threads on a high compression head. The tap appears to be 7/8 18 tpi, but when I tried to clean up the threads, it cut more than I expected and the spark plug would not thread into the hole. I tried it on an old head I had laying around and it did the same thing. purchased it on EBay some time ago, so return is not possible. Any thoughts on what I have and what I need. I measured the tpi and it is 18.
|
delete
Bill
Last edited by bbrocksr; 05-29-2021 at 03:42 PM.
|