View Single Post
Old 05-19-2014, 04:10 AM   #11
pauly250
Junior Member
 
pauly250's Avatar
 
Join Date: Jul 2013
Location: australia
Posts: 13
Default Re: 1939 ford 91T truck project in OZ

Quote:
Originally Posted by 41panelmark View Post
I agree with Mart and his comments. You might be surprised to find that the lift works well, try it when you get the engine running, if it works you can drain the fluid do so and re fill it with new. Mine sat for many years also and worked when I tried it. See my "tonners community page for details. Love to see more photos of the truck, looks good. Be sure to disconnect the speedometer cable before moving it. These things and the speedometer itself tend to freeze up after sitting a long while. Lube the cable and re-install the speedometer end and see if you can turn the cable with your fingers to make the speedometer work, if not you will have to pull that and get it un stuck.
hi thanks for the speedo info,the truck has been draged on and off a few tilttrays and i towed across the farm so hope i havent stuffed anything, more pics posted tonight
thanks
pauly250 is offline   Reply With Quote