The Ford Barn - View Single Post

flatjack9 · 01-29-2016, 10:29 AM

I don't have any pictures of my installation. I removed the top plate of the center web and flipped it 180 deg to form a tunnel for the tailshaft of the transmission. I also had to remove some material from the vertical plates. I then formed a rear mount behind the center core. Did not compromise the frame integrity at all.

01-29-2016, 10:29 AM	#13
flatjack9 Senior Member Join Date: May 2010 Location: Oshkosh, Wi Posts: 4,527	Re: Winfield Cams I don't have any pictures of my installation. I removed the top plate of the center web and flipped it 180 deg to form a tunnel for the tailshaft of the transmission. I also had to remove some material from the vertical plates. I then formed a rear mount behind the center core. Did not compromise the frame integrity at all.