View Single Post
Old 09-25-2016, 01:44 PM   #1
37coop
Senior Member
 
37coop's Avatar
 
Join Date: May 2013
Location: kent , u.k
Posts: 519
Default Removing the gearbox backward, it's stuck

Hi guys ,my 39 coupe needs the gearbox looking at ,I,m taking it out from the axle end ,I,v undone everything and dropped the axle etc but with two of us pulling and tugging from the rear it won't move ,never done it this way before so I,m wondering if there is a trick to it ,never had a problem removing from the front before ,any advice would be appreciated .thanks. Jim.
37coop is offline   Reply With Quote