The Ford Barn - View Single Post - Rough measurement to start with "toe" on a '32 front end

earlyride · 07-06-2020, 10:38 AM

When you set up toe in/toe out it should be done with the wheels on the ground. As Rotowrench states axles flex. Just the weight of the car will move your setting considerably. I measure my toe in/out half way up the center of the tire and compare front to rear, using a gauge made up to clear the frame of the car.

07-06-2020, 10:38 AM	#15
earlyride Senior Member Join Date: May 2010 Location: Petaluma, cal. Posts: 132	Re: Rough measurement to start with "toe" on a '32 front end When you set up toe in/toe out it should be done with the wheels on the ground. As Rotowrench states axles flex. Just the weight of the car will move your setting considerably. I measure my toe in/out half way up the center of the tire and compare front to rear, using a gauge made up to clear the frame of the car.