Re: Why didn't it start again?
Back to the problem out in the garage! I took the Carb off and thoroughly cleaned it out. There was a lot of rust/crud in the bottom. I removed the jets and blew everything out. All was clear. With much cranking, I got it to run for about a minute. Then it was "No go" from then on. The carb is leaking internally at the float. It's one of those "Caged" units where the float valve and the seat are one. By the way, It's a later "B" (Rectangular float) model and has given me no problems in the past. So, as before, I would appreciate any help.
Terry
|