The Ford Barn - View Single Post

tubman · 08-14-2020, 01:22 PM

After experiencing serious over voltage problems in my '67 Corvette and running through several defective VR's, I switched to a solid state unit. (I think it was an Echlin from NAPA.) It was small enough to install in the stock Delco case, so it is undetectable from an original. That was about 6 years ago and I have not had a problem since.

I can dig the number up if you need it.

08-14-2020, 01:22 PM	#7
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 10,320	Re: Electronic Voltage Regulator After experiencing serious over voltage problems in my '67 Corvette and running through several defective VR's, I switched to a solid state unit. (I think it was an Echlin from NAPA.) It was small enough to install in the stock Delco case, so it is undetectable from an original. That was about 6 years ago and I have not had a problem since. I can dig the number up if you need it.