The Ford Barn - View Single Post

Patrick L. · 01-19-2018, 08:16 AM

Marshall brings up a good point, which clutch is it ? A look thru the inspection cover should show which it is. 3 finger or 6 finger.

When I mentioned the cutting of the flywheel in post #7 I was referring to the proper cutting of the 'step'. That seems to be over looked at times.

01-19-2018, 08:16 AM	#14
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Pressure plate adjustment Marshall brings up a good point, which clutch is it ? A look thru the inspection cover should show which it is. 3 finger or 6 finger. When I mentioned the cutting of the flywheel in post #7 I was referring to the proper cutting of the 'step'. That seems to be over looked at times.