The Ford Barn - View Single Post - LED Tail Lights

Patrick L. · 05-17-2021, 05:33 AM

If you are still using incandescent front lights for the turns, then just replace them with higher candle power bulbs. They'll be available locally or from the vendors. When the 3 cp are replaced with 10cp bulbs there is enough resistance to fire the thermal 535 flasher. I use the cowls and parks as front turns.

I've tried the resisters and electronic flashers too, thats why I just change bulbs.

However since I've played with this there is supposed to be a flasher that will work on 6v, but, I haven't tried it.

05-17-2021, 05:33 AM	#10
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: LED Tail Lights - Adding Resistors If you are still using incandescent front lights for the turns, then just replace them with higher candle power bulbs. They'll be available locally or from the vendors. When the 3 cp are replaced with 10cp bulbs there is enough resistance to fire the thermal 535 flasher. I use the cowls and parks as front turns. I've tried the resisters and electronic flashers too, thats why I just change bulbs. However since I've played with this there is supposed to be a flasher that will work on 6v, but, I haven't tried it.