The Ford Barn - View Single Post

Mart · 02-02-2021, 07:32 PM

This is what I've been using. Thanks to Mac Van Pelt.
http://www.vanpeltsales.com/FH_web/f...ecs32-48V8.htm

80-90 on the main caps.
35-40 on the con rods. (Castellated).
50-60 on cast iron heads.
23-28 on the intake manifold.

I show my technique for the rod nuts here:
https://youtu.be/n_WhWtBxH58
And the mains here:
https://youtu.be/xbMZwXWecMU

Mart.

02-02-2021, 07:32 PM	#4
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,750	Re: 59 Engine bolt torque This is what I've been using. Thanks to Mac Van Pelt. http://www.vanpeltsales.com/FH_web/f...ecs32-48V8.htm 80-90 on the main caps. 35-40 on the con rods. (Castellated). 50-60 on cast iron heads. 23-28 on the intake manifold. I show my technique for the rod nuts here: https://youtu.be/n_WhWtBxH58 And the mains here: https://youtu.be/xbMZwXWecMU Mart. Last edited by Mart; 02-02-2021 at 07:42 PM.