Re: How bad is this crack?
V it, and weld it. Make sure good penetration. You can use mig. Used on the 1" thick I -beam dragline booms at work. If mig works on a 300' foot, 300 ton boom supporting a 150 ton load 180 feet out from machine, I think it will work on a lil ol car frame. Oh yeah, this is obviously done by certified welders, with mig and no fish plate.
__________________
I dig coal, which provides motivation for EVs.
Last edited by 1952henry; 07-24-2021 at 02:28 PM.
|